The following is the introduction of some features of pop-up push cards.
1. New Structure
The unique 2.5 layer structure of the pop-up window splits the traditional pusher into two parts, both of which have a certain degree of free travel, together with the drawer-type bezel surround, it is easier to hold when playing, and the hand will not touch the top slider when it is pressed to retract it, so as to maximize the effect of the slider's vibration.
2. Anti-disintegration Limit
There is an anti-disintegration limit structure between the three layers of the pop-up window, minimizing the risk of disintegration and bead drop, so that you can play anywhere, anytime. The pop-up window is a three-section direct push magnet push card, internal with 2.778mm zirconia beads, slightly smaller than the diameter of the track, in order to reduce the contact area of the beads and the track groove, as much as possible to enhance the degree of smooth Q-bouncing, so there is a certain degree of slider wobble as a normal phenomenon.
3. Minimize Wear and Tear
Both the slider and the interior of the main body are factory labeled with Teflon to prevent wear and tear, the Teflon can be hidden inside and not visible from the outside once the pushpin is installed. A lot of wear and tear on toys usually occurs when they are placed in different places. The bottom of the pop-up window is fitted with four high-hardness silicon nitride beads, which effectively prevent wear and tear on the bottom surface when placed in different places.
4. DIY Space
In order to control the thickness, the magnets of the pop-up window are glued and fixed, and the main body is not reserved for DIY space such as glow-in-the-dark slots, but at the bottom of the lanyard holes are made to support over the double-stranded 4mm and the following parachute rope (parachute rope products are attached), players can DIY rope knots to do with, or you can directly buy the finished product knots to use.
Buy it now at funedc.com and enjoy your EDC life!